The fast recovery speed (≤ 500 ns) suits it for switching power supplies, freewheeling diodes, and polarity protection in industrial and telecom equipment where low forward loss and high current density are needed.
For existing BOMs, procurement must go through independent distribution or surplus channels.
The 60 V reverse voltage sets the maximum DC blocking capability — adequate for 48 V telecom rails and 24 V industrial supplies, but marginal for 48 V with transients. The 15 A per diode rating (30 A total for the pair) defines the continuous current handling; thermal derating applies above 100°C case temperature, so heatsinking is necessary at full load. The 625 mV forward drop at 15 A is typical for a 60 V Schottky at this current density — expect higher Vf at elevated junction temperatures, which increases conduction loss.