Skip to main content
Log in
STMicroelectronics STPS30150CG — Discrete Semiconductors

STPS30150CG Schottky Diode, 15A, 150V, D²PAK, Obsolete

MPNSTPS30150CG
Obsolete

STMicroelectronics STPS30150CG Schottky rectifier, dual common-cathode, 15 A per diode, 150 V Vr, 920 mV Vf at 15 A, D²PAK (TO-263-3), 175°C junction, obsolete.

STMicroelectronics STPS30150CG datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STPS30150CG specifications
ParameterValue
Diode typeSchottky
MountingSurface Mount
Voltage - DC reverse (Vr)150 V
Voltage - forward (Vf) (Max) @ if920 mV @ 15 A
Current - reverse leakage @ vr6.5 µA @ 150 V
Current - average rectified (Io) (per diode)15A
Operating temperature - junction175°C(Max)
SpeedFast Recovery =< 500ns, > 200mA (Io)
PackageTube
CaseTO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Diode configuration1 Pair Common Cathode

Product details

Dual Schottky in D²PAK — 15 A per leg at 150 V

The STPS30150CG is a dual Schottky rectifier from STMicroelectronics, pairing two 15 A diodes in a common-cathode configuration within a single D²PAK (TO-263-3) surface-mount package. It is rated for a maximum DC reverse voltage of 150 V and delivers an average rectified current of 15 A per diode. The forward voltage drop is specified at 920 mV maximum at 15 A, and the junction can operate up to 175°C, giving the part a wide thermal margin in high-current rectification and OR-ing applications.

At 15 A average per diode, the STPS30150CG suits output rectification in switch-mode power supplies and DC-DC converters where the total load splits across two paralleled Schottkys in a common-cathode pair. The 150 V reverse voltage covers 48 V and 72 V bus rails with derating headroom. The 920 mV forward drop at 15 A is typical for a 150 V-class Schottky at this current density — expect higher Vf at elevated junction temperature, which the 175°C rating accommodates for designs that push the thermal envelope. Reverse leakage is 6.5 µA at 150 V, a figure that rises with temperature; the common-cathode layout simplifies the PCB trace routing for the output rail.

Lifecycle reality — obsolete, available through independent channels

Procurement for this part runs through independent distribution and surplus stock.

Frequently asked questions

What is the direct replacement for STPS30150CG?

STMicroelectronics has not published an official direct replacement for the STPS30150CG. For a pin-compatible alternative, look for a dual common-cathode Schottky in D²PAK (TO-263-3) rated at 15 A per diode and 150 V Vr — such as the STPS30150CT (TO-220) or a comparable Vishay or ON Semiconductor part, but verify the package and footprint match your board.

What are the specifications of STPS30150CG?

The STPS30150CG is a dual common-cathode Schottky rectifier: 15 A average rectified current per diode, 150 V maximum DC reverse voltage, 920 mV maximum forward voltage at 15 A, 6.5 µA reverse leakage at 150 V, 175°C maximum junction temperature, in a D²PAK (TO-263-3) surface-mount package.