Skip to main content
STMicroelectronics STPS1L60AFN — Discrete Semiconductors

STPS1L60AFN Schottky Rectifier, 60V 1A, SMAflat Package

MPNSTPS1L60AFN
Obsolete

STMicroelectronics STPS1L60AFN Schottky rectifier, 60 V reverse voltage, 1 A average rectified current, 570 mV forward drop at 1 A, DO-221AC SMA Flat Leads package, 175°C junction temperature.

$0.6000Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STPS1L60AFN specifications
ParameterValue
Diode typeSchottky
MountingSurface Mount
Voltage - DC reverse (Vr)60 V
Voltage - forward (Vf) (Max) @ if570 mV @ 1 A
Current - reverse leakage @ vr50 µA @ 60 V
Current - average rectified1A
Operating temperature - junction175°C
SpeedFast Recovery =< 500ns, > 200mA (Io)
PackageTape & Reel (TR); Cut Tape (CT)
CaseDO-221AC, SMA Flat Leads

Product details

Schottky rectifier for low-voltage, moderate-current rails

The STPS1L60AFN is a 60 V, 1 A Schottky rectifier from STMicroelectronics, housed in the compact DO-221AC SMA Flat Leads package with a SMAflat Notch supplier device package. It delivers a forward voltage of 570 mV at 1 A, keeping conduction losses low in power supply output rectification, freewheeling diodes, and polarity protection circuits.

For BOM lines that still call out this exact part number, procurement runs through independent distribution — last-time-buy stock or surplus inventory.

Key ratings for fit

The 1 A average rectified current covers moderate loads like secondary-side rectification in a 10–15 W offline supply or a freewheeling clamp on a relay coil. Forward voltage of 570 mV at 1 A is typical for a 60 V Schottky at this current density — expect lower Vf at lighter loads, which helps efficiency in low-duty-cycle applications. Reverse leakage is 50 µA at 60 V, a figure to budget for in high-temperature operation.

Package and storage notes

The DO-221AC SMA Flat Leads package is a low-profile surface-mount package with flat leads, smaller than a standard SMA. The SMAflat Notch variant has a polarity-indicating notch.

Frequently asked questions

What is the replacement for STPS1L60AFN?

For a new design, look at ST's current 60 V, 1 A Schottky rectifiers in the DO-221AC SMA Flat Leads package family — they will share the same footprint and similar electrical characteristics. For an existing BOM, source the STPS1L60AFN through independent channels against an RFQ.

What are the specifications of STPS1L60AFN?

It is a 60 V, 1 A Schottky rectifier with a forward voltage of 570 mV at 1 A, reverse leakage of 50 µA at 60 V, and a maximum junction temperature of 175°C.