With a gate charge of 29 nC at 10 V and input capacitance of 1060 pF at 100 V drain-source, the drive requirements are modest — a standard 10 V gate-driver IC or a bootstrap circuit with a small series gate resistor can handle the switching transitions without excessive cross-conduction. Maximum power dissipation is 150 W at case temperature, which sets the heatsink sizing requirement for continuous operation.
Obsolete — sourcing and replacement planning
This means the manufacturer has ceased production and no further last-time-buy windows are open. Because the part is obsolete, the primary sourcing channel is the independent distribution market. No stock or lead-time number can be stated here; the procurement desk should submit an RFQ for the exact quantity and required date-code window.
Package and mounting — TO-220 through-hole
The tab is electrically connected to the drain, so an insulating pad and bushing are required if the heatsink is at chassis ground. For the PCB layout, the TO-220 footprint is well-established: a 2.54 mm pitch pin row with a large copper pad under the tab for thermal conduction. The package is suitable for wave soldering or manual soldering with a 35 W iron. No special moisture sensitivity level (MSL) is specified for this hermetic-style package, but standard handling precautions apply.