Skip to main content
Log in
STMicroelectronics STP210N75F6 — Discrete Semiconductors

STP210N75F6 N-Channel MOSFET, 75V 120A TO-220, Obsolete

MPNSTP210N75F6
Obsolete

STMicroelectronics DeepGATE™, STripFET™ VI series, N-Channel MOSFET, 75 V Drain-to-Source Voltage, 120 A Continuous Drain Current, 3.7 mOhm Rds(on) at 60 A 10 V, TO-220-3 Through Hole, -55°C to 175°C Operating Temperature.

$4.4100Ref. price · indicative, final on quote
STMicroelectronics STP210N75F6 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STP210N75F6 specifications
ParameterValue
SeriesDeepGATE™, STripFET™ VI
FET typeN-Channel
MountingThrough Hole
Drain to source voltage75 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C120A (Tc)
Power dissipation300W (Tc)
Operating temperature-55°C~175°C(TJ)
PackageTube
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-220-3
Vgs(th) (Max) @ id4V @ 250µA
Rds on (Max) @ id, vgs3.7mOhm @ 60A, 10V
Gate charge (Qg) (Max) @ vgs171 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds11800 pF @ 25 V

Product details

75 V, 120 A N-channel — obsolete, still spec'd into production lines

For BOM lines that still require this exact part, procurement must rely on independent distribution and surplus inventory channels.

The 75 V drain-to-source voltage (Vdss) gives adequate headroom for 48 V and 60 V nominal rails, but design margin tightens above a 60 V steady-state bus — derate for transients.

Package and mounting — TO-220 through-hole

The tab is the drain terminal. For high-current designs, ensure adequate copper area on the PCB tab pad and a mechanical heatsink rated for the dissipated power.

Frequently asked questions

What is the replacement for STP210N75F6?

No official replacement order code is recorded on this listing. For a pin-compatible alternative within the same STripFET VI family, review the current ST N-channel 75 V TO-220 portfolio — parametric differences in Rds(on), gate charge, and current rating apply. Confirm fit against your operating point before substituting.

What is the Rds(on) of STP210N75F6?

The maximum Rds(on) is 3.7 mOhm at a drain current of 60 A and a gate-to-source voltage of 10 V.

What package is STP210N75F6?

It is supplied in a TO-220-3 through-hole package.