Skip to main content
STMicroelectronics STM32L471QEI7 — Microcontrollers & Processors (MCU / MPU / DSP)

ST STM32L471QEI7 ARM Cortex-M4 MCU, 80MHz, 512KB Flash, 132-UFBGA

MPNSTM32L471QEI7
Active

STMicroelectronics STM32L4 series, ARM Cortex-M4, 32-bit single-core, 80MHz, 512KB Flash, 128K x 8 RAM, CANbus, QSPI, 109 I/O, 132-UFBGA, -40°C to 105°C.

$5.9307Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

STM32L471QEI7 Technical Specifications
ParameterValue
SeriesSTM32L4
Mounting typeSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.71V ~ 3.6V
Operating temperature-40°C ~ 105°C (TA)
Speed80MHz
PackageTray
RAM size128K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, PWM, WDT
ConnectivityCANbus, EBI/EMI, I²C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, SWPMI, UART/USART
Number of i (O)109
Core processorARM® Cortex®-M4
Case132-UFBGA
Data convertersA/D 19x12b; D/A 2x12b
Program memory size512KB (512K x 8)

Product details

What the STM32L471QEI7 is and where it fits

The STM32L471QEI7 is a 32-bit ARM Cortex-M4 microcontroller from STMicroelectronics' STM32L4 series, clocked at 80 MHz with 512 KB of Flash and 128K x 8 of RAM. It packs a rich peripheral set including CANbus, QSPI, multiple I²C and SPI interfaces, and a 19-channel 12-bit ADC, all in a 132-UFBGA package. This part targets industrial control, motor drives, and outdoor telecom equipment where the -40°C to 105°C operating range and low-power architecture matter.

80 MHz Cortex-M4 — timing headroom for control loops

The 80 MHz core speed with single-cycle multiply and hardware FPU provides throughput for real-time control loops. The 512 KB Flash is sized for moderate application code plus a bootloader.

Lifecycle and sourcing reality

The STM32L471QEI7 is marked end-of-life (EOL) in the supply chain. For a BOM line that needs this exact code, the only channel is surplus or independent distribution — sourced and quoted to order against an RFQ.

Connectivity — CAN and QSPI confirmed

Yes, this part supports both CANbus and QSPI. The CAN interface handles industrial fieldbus and automotive-style networks; QSPI gives you a fast serial memory bus for external Flash or RAM expansion without tying up the main data bus. The 109 GPIOs leave plenty of headroom for parallel LCDs or sensor arrays.

Frequently asked questions

Does STM32L471QEI7 support CAN and QSPI?

Yes, the STM32L471QEI7 includes both CANbus and QSPI interfaces as part of its connectivity set, along with I²C, SPI, UART/USART, and SAI.

What is the operating temperature range of STM32L471QEI7?

The STM32L471QEI7 is rated for -40°C to 105°C (TA), making it suitable for industrial and automotive under-hood environments.

Is there a pin-compatible replacement for STM32L471QEI7?

No official pin-compatible successor is listed for the STM32L471QEI7. A board-level evaluation of the STM32L4+ or STM32U5 series is needed for a replacement, as the 132-UFBGA footprint may carry over but the peripheral map differs.

What is the datasheet for STM32L471QEI7?

The datasheet for the STM32L471QEI7 is available from STMicroelectronics under the base product number STM32L471. It covers the full STM32L4x7 family specifications.