Skip to main content
STMicroelectronics STM32L083V8T6 — Microcontrollers & Processors (MCU / MPU / DSP)
STMicroelectronics

STM32L083V8T6 STMicro ARM Cortex-M0+ MCU, 32MHz, 64KB Flash

MPNSTM32L083V8T6
Active

STMicroelectronics STM32L0 series STM32L083V8T6, ARM Cortex-M0+, 32-Bit Single-Core, 32MHz, 64KB Flash, 20K x 8 RAM, 3K x 8 EEPROM, 100-LQFP, -40°C ~ 85°C.

$3.8659Ref. price · indicative, final on quote
STM32L083V8T6 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

STM32L083V8T6 Technical Specifications
ParameterValue
SeriesSTM32L0
Mounting typeSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C ~ 85°C (TA)
Speed32MHz
PackageTray
RAM size20K x 8
Core size32-Bit Single-Core
EEPROM size3K x 8
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
ConnectivityI²C, IrDA, LINbus, SPI, UART/USART, USB
Number of i (O)84
Core processorARM® Cortex®-M0+
Case100-LQFP
Data convertersA/D 16x12b; D/A 2x12b
Program memory size64KB (64K x 8)

Product details

ARM Cortex-M0+ with a full peripheral load

The STM32L083V8T6 is STMicroelectronics' 32-bit MCU built around the ARM Cortex-M0+ core, clocked at 32MHz. It carries 64KB of Flash program memory, 20KB of RAM, and a separate 3KB EEPROM block for nonvolatile data storage without external parts. What sets this part apart in the STM32L0 family is the integrated LCD driver — it can directly drive a segmented glass LCD panel without a separate controller chip.

Active lifecycle — no near-term LTB risk

The STM32L0 series remains an active low-power portfolio; the L083 is a current-orderable line item.

Package and board integration

The 100-LQFP package (14x14mm body) provides 84 usable I/Os. It is a surface-mount, fine-pitch (0.5mm) leaded package — no BGA rework challenges, but the tight pitch means a well-controlled solder-paste stencil and profile. Standard JEDEC MSL-3 moisture sensitivity applies: bake before reflow if the bag has been open past the floor-life window. The exposed pad (thermal pad on the underside) should be connected to the PCB ground plane with a via array for heat sinking; the datasheet recommends a 2x2 via matrix under the pad.

Frequently asked questions

Does STM32L083V8T6 support USB communication?

The USB interface is device-only (no OTG) and runs at full-speed 12 Mbps.

Does STM32L083V8T6 have a built-in LCD controller?

Yes, the LCD peripheral is integrated on-chip. It can drive a segmented glass LCD panel directly — up to 8 common terminals and 44 segment terminals depending on the multiplexing configuration — eliminating the need for a separate LCD driver IC.

What are the key differences between STM32L083V8T6 and STM32L073V8T6?

Both are STM32L0 series parts with the same ARM Cortex-M0+ core, 32MHz clock, 64KB Flash, and 20KB RAM. The STM32L083 adds the integrated LCD driver and a 3KB EEPROM block — the STM32L073 lacks both. If your design needs a segmented LCD interface or byte-addressable nonvolatile storage without external EEPROM, the L083 is the correct choice. For applications without those requirements, the L073 is a cost-optimized alternative.