STMicroelectronics STM32G0 series 32-bit ARM Cortex-M0+ MCU, STM32G031C8U6, 64 MHz, 64 KB Flash, 8 KB RAM, 44 I/O, 48-UFQFPN (7x7), -40 to 85°C.
| Parameter | Value |
|---|---|
| Series | STM32G0 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.7V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 64MHz |
| Package | Tray |
| RAM size | 8K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| Connectivity | I²C, IrDA, LINbus, SPI, UART/USART |
| Number of i (O) | 44 |
| Core processor | ARM® Cortex®-M0+ |
| Case | 48-UFQFN Exposed Pad |
| Data converters | A/D 19x12b |
| Program memory size | 64KB (64K x 8) |
Housed in a 48-lead UFQFPN with an exposed pad (7x7 mm), this package suits two-layer PCBs where thermal relief and routing density matter. The exposed pad needs a solid ground-plane solder connection for both thermal and electrical performance. Surface-mount only; no through-hole variant exists.
The supply range is 1.7 V to 3.6 V on Vcc/Vdd. The internal oscillator and brown-out detect operate within this window, so no external regulator is required if the rail stays in that band.
No, the STM32G031C8U6 is not 5V tolerant. The maximum supply is 3.6 V, and I/O pins are not rated for 5 V levels. Level shifters are needed for 5 V logic interfaces.
64 MHz ARM Cortex-M0+ core, 64 KB Flash, 8 KB RAM, 44 I/O, 19-channel 12-bit ADC, serial interfaces including I²C, SPI, UART/USART, IrDA, LINbus, and I²S, in a 48-UFQFPN 7x7 mm package, operating from -40 to 85°C.