Skip to main content
Log in
STMicroelectronics STM32F767VIH6 — Microcontrollers & Processors (MCU / MPU / DSP)

STM32F767VIH6 MCU, ARM Cortex-M7, 216 MHz, 2 MB Flash

MPNSTM32F767VIH6
Active

STMicroelectronics STM32F7 series, ARM® Cortex®-M7 32-Bit Single-Core MCU, 216MHz, 2MB (2M x 8) FLASH, 512K x 8 RAM, 100-TFBGA, 82 I/O, -40°C ~ 85°C.

$20.0400Ref. price · indicative, final on quote
STMicroelectronics STM32F767VIH6 datasheet (PDF)
Packaging100-TFBGA
RoHSROHS3 Compliant
SeriesSTM32F7
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

STM32F767VIH6 specifications
ParameterValue
SeriesSTM32F7
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.7V ~ 3.6V
Operating temperature-40°C ~ 85°C (TA)
Speed216MHz
PackageTray
RAM size512K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, MMC/SD/SDIO, QSPI, SAI, SPDIF, SPI, UART/USART, USB OTG
Number of i (O)82
Core processorARM® Cortex®-M7
Case100-TFBGA
Data convertersA/D 16x12b; D/A 2x12b
Program memory size2MB (2M x 8)

Product details

ARM Cortex-M7 at 216 MHz — what the speed rating means for the BOM

The STM32F767VIH6: The ARM Cortex-M7 core runs at 216 MHz with a single-precision FPU and DSP extensions. The 2 MB Flash and 512 KB SRAM support real-time control and signal processing workloads.

Connectivity and peripheral set — Ethernet, CAN, and display support on one chip

The Ethernet interface supports industrial protocols like EtherCAT or PROFINET when paired with an external PHY. The LCD controller can drive a QVGA panel directly, which is common in embedded HMIs. The peripheral set reduces external component count for designs that need both connectivity and a local display — a single STM32F767VIH6 replaces what would otherwise require a separate Ethernet controller and a graphics driver IC.

Housed in a 100-ball TFBGA (8x8 mm), this part is intended for surface-mount assembly on dense PCBs.

ROHS3 compliant.

Frequently asked questions

Does STM32F767VIH6 support Ethernet?

Yes, the connectivity set includes Ethernet MAC, along with CANbus, USB OTG, and multiple serial interfaces. An external PHY is required for the physical layer.

What is the replacement for STM32F767VIH6 if it becomes unavailable?

No official successor or direct pin-compatible replacement is listed in the cross-reference records. The STM32F7 series includes other density and package options, but none are a drop-in substitute. Sourcing through independent distribution is the recommended channel for this active part.

Can STM32F767VIH6 be used with STM32CubeIDE?

Yes, STM32CubeIDE and the STM32CubeF7 firmware package fully support the STM32F767VIH6, including HAL drivers, middleware for Ethernet and USB, and example projects.