Skip to main content
STMicroelectronics STM32F429IGH6 — Microcontrollers & Processors (MCU / MPU / DSP)

STM32F429IGH6 STM32F4 ARM Cortex-M4 MCU, 180 MHz, 1 MB Flash

MPNSTM32F429IGH6
Active

STMicroelectronics STM32F4 series, ARM Cortex-M4, 32-bit single-core, 180 MHz, 1 MB Flash, 256K x 8 RAM, 140 I/O, CANbus/EBI/EMI/Ethernet/I²C/IrDA/LIN/SPI/UART/USART/USB OTG, 1.8V–3.6V, -40°C–85°C, surface-mount 201-UFBGA.

$20.6800Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STM32F429IGH6 specifications
ParameterValue
SeriesSTM32F4
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed180MHz
PackageTray
RAM size256K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, SPI, UART/USART, USB OTG
Number of i (O)140
Core processorARM® Cortex®-M4
Case201-UFBGA
Data convertersA/D 24x12b; D/A 2x12b
Program memory size1MB (1M x 8)

Product details

The STM32F429IGH6: It carries 1 MB of Flash and 256 KB of SRAM, 140 I/O lines, and a peripheral set including Ethernet MAC, CAN 2.0B, USB OTG HS, and a parallel LCD interface.

The base product number STM32F429 covers multiple density and package variants, so a pin-compatible swap exists if the BGA becomes a supply bottleneck.

Internal oscillator means it can boot without an external crystal, though the Ethernet and USB PHY will still need a 25 MHz reference.

Frequently asked questions

What is the difference between STM32F429IGH6 and STM32F429IGT6?

The STM32F429IGH6 comes in a 201-ball UFBGA package (10x10 mm), while the STM32F429IGT6 uses an LQFP-176 package with gull-wing leads. The UFBGA saves board area but requires a more complex PCB stack-up and rework process. Both share the same 180 MHz Cortex-M4 core, 1 MB Flash, and 256 KB SRAM, so firmware is binary-compatible between them — only the PCB footprint changes.

Is STM32F429IGH6 compatible with STM32F429?

Yes. The STM32F429IGH6 is a specific variant within the STM32F429 product family. The base product number STM32F429 covers all density and package options sharing the same core, peripherals, and memory map. Code written for any STM32F429 device will run on this part without modification, provided the linker script accounts for the 1 MB Flash and 256 KB SRAM sizes.