Skip to main content
Log in
STMicroelectronics STM32F100ZCT6B — Microcontrollers & Processors (MCU / MPU / DSP)

STM32F100ZCT6B ARM Cortex-M3 MCU, 24 MHz, 256 KB Flash

MPNSTM32F100ZCT6B
Active

STMicroelectronics STM32F1 series, ARM Cortex-M3, 32-Bit Single-Core, 256KB (256K x 8) FLASH, 24MHz, 2V ~ 3.6V, 112 I/O, 144-LQFP, -40°C ~ 85°C (TA), Tray.

$9.2900Ref. price · indicative, final on quote
STMicroelectronics STM32F100ZCT6B datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STM32F100ZCT6B specifications
ParameterValue
SeriesSTM32F1
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))2V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed24MHz
PackageTray
RAM size24K x 8
Core size32-Bit Single-Core
PeripheralsDMA, PDR, POR, PVD, PWM, Temp Sensor, WDT
ConnectivityI²C, IrDA, LINbus, SPI, UART/USART
Number of i (O)112
Core processorARM® Cortex®-M3
Case144-LQFP
Data convertersA/D 16x12b; D/A 2x12b
Program memory size256KB (256K x 8)

Product details

256 KB Flash, 24 KB SRAM — sizing the firmware budget

The STM32F100ZCT6B: The 256 KB Flash and 24 KB SRAM fit a bare-metal control loop or a small RTOS. The Flash runs at 24 MHz with zero wait states.

The base product number STM32F100 spans multiple density and package options, so a future migration within the same family footprint is possible if requirements change.

144-LQFP — 112 I/O in a 20x20 mm body

The 144-pin LQFP (20x20 mm) gives access to 112 I/O lines, enough for parallel LCD data buses, multiple UART/SPI/I²C peripherals, and a bank of GPIO for keypad or sensor readout. The 0.5 mm pitch requires careful PCB routing but is standard for two-layer boards with a ground plane.

Peripherals: ADC, DAC, PWM, and serial interfaces

PWM outputs from the advanced-control timer drive three-phase motors.

Frequently asked questions

Does STM32F100ZCT6B have PWM and ADC peripherals?

Yes. The STM32F100ZCT6B includes a 16-channel 12-bit ADC, dual 12-bit DAC, and PWM outputs from the advanced-control timer, along with DMA, PDR, POR, PVD, and a temperature sensor.

Does STM32F100ZCT6B have I2C interface?

Yes.