STMicroelectronics STM32F100R6T6B, STM32F1 series, 32-Bit Single-Core ARM Cortex-M3 MCU, 24 MHz, 32KB (32K x 8) FLASH, 4K x 8 RAM, 64-LQFP, -40°C ~ 85°C.
| Parameter | Value |
|---|---|
| Series | STM32F1 |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 2V ~ 3.6V |
| Operating temperature | -40°C ~ 85°C (TA) |
| Speed | 24MHz |
| Package | Tray |
| RAM size | 4K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Connectivity | I²C, IrDA, LINbus, SPI, UART/USART |
| Number of i (O) | 51 |
| Core processor | ARM® Cortex®-M3 |
| Case | 64-LQFP |
| Data converters | A/D 16x12b; D/A 2x12b |
| Program memory size | 32KB (32K x 8) |
The STM32F100R6T6B: The 64-LQFP package gives you 51 I/O, plus a 16-channel 12-bit ADC and two 12-bit DACs on-chip, which can save a couple of external analog parts on a mixed-signal design.
For a field-service kit or a long-life industrial controller, this is the right kind of supply certainty.
The two parts are pin-compatible in the same 64-LQFP package and share the same 24 MHz Cortex-M3 core. The difference is Flash density: the R6 carries 32 KB, while the R8 carries 64 KB. If your firmware fits in 32 KB, the R6 is the cost-optimized pick; if you need the extra headroom for a larger application stack, step up to the R8.