600 V, 16 A PowerMESH™ IGBT in TO-220FP
The STMicroelectronics STGF19NC60HD is a 600 V, 16 A IGBT from the PowerMESH™ series, housed in a TO-220FP full-pack isolated package. It's built for hard-switching applications like motor drives, power factor correction (PFC) stages, and general-purpose inverters where you need a through-hole device with a fully isolated tab — no separate mounting pad or insulator required. The full-pack TO-220FP simplifies heatsink attachment and keeps the thermal path clean.
Switching losses and gate drive
Switching energy is specified at 85 µJ turn-on and 189 µJ turn-off under the test condition of 390 V, 12 A, 10 Ω gate resistor, and 15 V gate drive. That gives you a solid starting point for loss estimation in a hard-switched topology. Gate charge is 53 nC — modest enough that a standard IGBT driver like the STGAP series or a bootstrap half-bridge driver can handle it without excessive drive power. The typical turn-on delay is 25 ns and turn-off delay is 97 ns at 25 °C, which keeps dead-time margins manageable.
The TO-220FP (full pack) isolates the back tab electrically — no mica washer or sil-pad needed. The part is rated for 32 W maximum power dissipation.
Lifecycle status is Active. ROHS3 compliant.