STMicroelectronics SuperMESH3™ N-channel MOSFET, 620 V Vdss, 4.2 A Id, 1.6 Ohm Rds(on) at 10 V, TO-220-3 Full Pack (TO-220FP), -55°C to 150°C.
| Parameter | Value |
|---|---|
| Series | SuperMESH3™ |
| FET type | N-Channel |
| Mounting | Through Hole |
| Drain to source voltage | 620 V |
| Drive voltage (Max rds on, min rds on) | 10V |
| Current - continuous drain (Id) @ 25°C | 4.2A (Tc) |
| Power dissipation | 25W (Tc) |
| Operating temperature | -55°C ~ 150°C (TJ) |
| Package | Tube |
| Vgs | ±30V |
| Technology | MOSFET (Metal Oxide) |
| Case | TO-220-3 Full Pack |
| Vgs(th) (Max) @ id | 4.5V @ 50µA |
| Rds on (Max) @ id, vgs | 1.6Ohm @ 2.1A, 10V |
| Gate charge (Qg) (Max) @ vgs | 26 nC @ 10 V |
| Input capacitance (Ciss) (Max) @ vds | 680 pF @ 50 V |
That is the number to use for conduction-loss calculations at the nominal operating point. Input capacitance is 680 pF at 50 V drain-source — a light capacitive load on the driver, so switching edges stay clean without excessive ringing.
The TO-220FP package has a single mounting hole for a screw or clip.
This is the value to use for worst-case conduction-loss budgeting.
Yes, the part is ROHS3 compliant.