STMicroelectronics STD7N65M6, N-Channel MOSFET, MDmesh™ M6 series, 650 V Vdss, 5 A Id, 990 mOhm Rds(on) max at 10 V, D-PAK (TO-252) surface mount, -55 to 150 °C junction.
| Parameter | Value |
|---|---|
| Series | MDmesh™ M6 |
| FET type | N-Channel |
| Mounting | Surface Mount |
| Drain to source voltage | 650 V |
| Drive voltage (Max rds on, min rds on) | 10V |
| Current - continuous drain (Id) @ 25°C | 5A (Tc) |
| Power dissipation | 60W (Tc) |
| Operating temperature | -55°C~150°C(TJ) |
| Package | Tape & Reel (TR) |
| Vgs | ±25V |
| Technology | MOSFET (Metal Oxide) |
| Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Vgs(th) (Max) @ id | 3.75V @ 250µA |
| Rds on (Max) @ id, vgs | 990mOhm @ 2.5A, 10V |
| Gate charge (Qg) (Max) @ vgs | 6.9 nC @ 10 V |
| Input capacitance (Ciss) (Max) @ vds | 220 pF @ 100 V |
The STD7N65M6: It comes in a D-PAK (TO-252) surface-mount package, a common footprint for medium-power DC-DC converters and auxiliary supplies.
Total gate charge is 6.9 nC at 10 V. Input capacitance is 220 pF at 100 V drain-source. Input capacitance is 220 pF at 100 V drain-source, a figure that sets the switching energy per cycle and influences the turn-on delay.
The part is listed with standard RoHS compliance; the D-PAK package uses matte-tin plating on the leads, which is a lead-free finish.
STMicroelectronics does not list an official pin-compatible second source for this exact MDmesh M6 variant. For dual-sourcing, look at other 650 V N-channel MOSFETs in the same TO-252 footprint with similar gate threshold and capacitance — but confirm the Rds(on) and Qg trade-offs against your switching frequency and load current.