Skip to main content
Log in
STMicroelectronics STD30NF04LT — Discrete Semiconductors

STD30NF04LT N-Channel MOSFET, 40V 30A, DPAK, Obsolete

MPNSTD30NF04LT
Obsolete

STMicroelectronics STD30NF04LT, STripFET™ II, N-Channel MOSFET, 40V Vdss, 30A Id, 30mΩ Rds(on) at 10V, 25nC Qg, DPAK surface-mount, -55°C to 175°C.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

STD30NF04LT specifications
ParameterValue
SeriesSTripFET™ II
FET typeN-Channel
MountingSurface Mount
Drain to source voltage40 V
Drive voltage (Max rds on, min rds on)5V, 10V
Current - continuous drain (Id) @ 25°C30A (Tc)
Power dissipation50W (Tc)
Operating temperature-55°C~175°C(TJ)
PackageTape & Reel (TR)
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-252-3, DPak (2 Leads + Tab), SC-63
Vgs(th) (Max) @ id2.5V @ 250µA
Rds on (Max) @ id, vgs30mOhm @ 15A, 10V
Gate charge (Qg) (Max) @ vgs25 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds720 pF @ 25 V

Product details

The STD30NF04LT is listed as Obsolete by STMicroelectronics.

Ratings that decide the fit

At 15 A that is about 6.75 W dissipated in the die — within the 50 W package limit at Tc=25°C, but you will need a good thermal path to the board copper. The gate threshold voltage maximum is 2.5 V at 250 µA drain current, and the drive voltage range (5 V to 10 V) means a 5 V logic-level gate signal will turn it on, though Rds(on) will be higher than the 10 V figure.

The device comes in a TO-252-3 DPAK surface-mount package (2 leads plus the tab). For a 30 A load, the trace width from the source pin and the tab solder area need to be sized for the current — standard 2 oz copper with a 5 mm wide trace per 10 A is a starting point.

Frequently asked questions

What is the replacement for STD30NF04LT?

For a pin-compatible alternative, you would look at other 40 V, 30 A N-channel MOSFETs in the DPAK (TO-252) package from vendors such as Infineon, ON Semiconductor, or Nexperia — the exact fit depends on your gate-drive voltage and switching frequency requirements.

Is STD30NF04LT RoHS compliant?

The evidence does not state RoHS compliance status for this order code. Verify with the supplier at quote time.