STMicroelectronics lists the LSM303DLHCTR as Obsolete. Quantities are lot-specific and confirmed at RFQ — no franchised stock commitment.
6-axis combo sensor with I²C digital output
The LSM303DLHCTR integrates a 3-axis accelerometer and a 3-axis magnetometer in a single 14-VFLGA package. The I²C interface is the only digital output bus, so the host MCU must have an available I²C port or a bit-banged GPIO pair. The 14-LGA (3x5 mm) footprint is a standard land-grid array with no exposed thermal pad — the sensor draws negligible current, so the package relies on the PCB copper for heat sinking, not a dedicated pad.
Package and board-fit for the 14-LGA
Surface-mount 14-VFLGA with a 3x5 mm body. The 0.50 mm pitch demands a controlled solder-paste stencil and a reflow profile matching the JEDEC MSL level on the reel label — no lead-free exemption, so standard SAC305 solder works. The reel quantity is the standard 7-inch reel count for this package family; the CT option suits prototype or low-volume builds without committing to a full reel.