Skip to main content
Log in
STMicroelectronics FERD30L60CG-TR

STMicro FERD30L60CG-TR FERD Diode, 60V 15A D²PAK

MPNFERD30L60CG-TR
End of Life

STMicroelectronics FERD30L60CG-TR, FERD (Field Effect Rectifier Diode) array, 1 Pair Common Cathode, 60 V DC Reverse, 15 A Average Rectified per Diode, 545 mV Forward Drop, Fast Recovery ≤ 500 ns, D²PAK (TO-263), Surface Mount, Active, ROHS3.

$1.5Ref. price · indicative, final on quote
STMicroelectronics FERD30L60CG-TR datasheet (PDF)
PackagingTO-263-3, D²Pak (2 Leads + Tab), TO-263AB
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

FERD30L60CG-TR specifications
ParameterValue
Diode typeFERD (Field Effect Rectifier Diode)
MountingSurface Mount
Voltage - DC reverse (Vr)60 V
Voltage - forward (Vf) (Max) @ if545 mV @ 15 A
Current - reverse leakage @ vr820 µA @ 60 V
Current - average rectified (Io) (per diode)15A
Operating temperature - junction150°C (Max)
SpeedFast Recovery =< 500ns, > 200mA (Io)
PackageTape & Reel (TR); Cut Tape (CT)
CaseTO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Diode configuration1 Pair Common Cathode

Product details

FERD30L60CG-TR — dual 15 A common-cathode rectifier in D²PAK

The 545 mV forward drop at 15 A is the headline spec that justifies the FERD technology premium over a standard Schottky.

Active production, ROHS3 — no compliance surprises

D²PAK footprint — tab is common cathode

The TO-263-3 D²PAK surface-mount package has the exposed metal tab as the common cathode connection (pin 2 and tab). The package is the standard high-power SMD footprint for 15 A-class rectifiers; the tab must be soldered to a sufficient copper area for thermal dissipation.

Frequently asked questions

What is the difference between FERD30L60CG-TR and STPS30L60CG?

The STPS30L60CG is a standard 60 V Schottky diode array in the same D²PAK package and common-cathode configuration. The FERD30L60CG-TR uses FERD (Field Effect Rectifier Diode) technology, which gives a lower forward voltage drop (545 mV vs typically 650-700 mV for the Schottky at 15 A) at the cost of higher reverse leakage. The FERD part is the better choice where conduction loss is critical; the Schottky may be preferred where leakage at high temperature is a concern. Both are pin-compatible and can be swapped in the same PCB footprint, but the thermal and efficiency trade-off should be verif

Is FERD30L60CG-TR lead-free and RoHS compliant?

Yes, the part is ROHS3 compliant, meaning it meets the EU Restriction of Hazardous Substances directive including the exemption-free requirements for lead, mercury, cadmium, and other restricted substances.

Can I replace FERD30L60CG-TR with STPS30L60CG?

The STPS30L60CG is a pin-compatible Schottky alternative in the same D²PAK package and common-cathode configuration. However, the forward voltage and leakage characteristics differ — the FERD has a lower Vf (545 mV vs typically 650-700 mV) but higher leakage. A direct replacement should be verified for thermal and efficiency impact in the specific application, especially at elevated junction temperatures.