Skip to main content
NXP Semiconductors TJA1021T/10/C,118 — Analog & Data Acquisition
NXP Semiconductors

NXP TJA1021T/10/C,118 LIN Transceiver, AEC-Q100, SOIC-8

MPNTJA1021T/10/C,118
End of Life

NXP TJA1021T/10/C,118 LIN transceiver, full duplex, 1/1 driver/receiver, 5.5V to 27V supply, 175 mV receiver hysteresis, AEC-Q100 qualified, 8-SOIC package.

$1.57Ref. price · indicative, final on quote
TJA1021T/10/C,118 datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TJA1021T/10/C,118 Technical Specifications
ParameterValue
TypeTransceiver
Mounting typeSurface Mount
Voltage5.5V ~ 27V
ProtocolLINbus
GradeAutomotive
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
QualificationAEC-Q100
Case8-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis175 mV
Number of drivers (Receivers)1/1

Product details

LIN transceiver for automotive bus nodes

The NXP TJA1021T/10/C,118 is a single-wire LIN transceiver designed for automotive in-vehicle networks. It handles the physical layer of the LIN bus protocol, converting digital UART signals to the LIN bus levels and back, with a full-duplex 1/1 driver/receiver configuration. The device is AEC-Q100 qualified, making it suitable for under-hood and cabin electronics where reliability over temperature and vibration is required.

Supply range and bus interface

The transceiver operates from a 5.5V to 27V supply, covering both 12V and 24V automotive battery systems without an external regulator. The receiver includes 175 mV of hysteresis to reject bus noise and ensure clean signal recovery on long or noisy LIN wires.

Package and mounting

Housed in an 8-pin SOIC package (8-SO, 0.154" body width, 3.90 mm), surface-mount assembly. The SOIC-8 footprint is standard for LIN transceivers, simplifying layout and second-source evaluation.

Lifecycle and supply position

Listed as Active in production with ROHS3 compliance. No end-of-life notification or last-time-buy schedule is in effect.

Frequently asked questions

Is TJA1021T/10/C,118 compatible with LIN 2.0?

The TJA1021T/10/C,118 is a LIN transceiver compliant with the LIN protocol physical layer. It supports LIN 2.0 and SAE J2602 bus systems, as typical for NXP's TJA1021 family.

What is the closest pin-compatible alternative to TJA1021T/10/C,118?

Within the same NXP LIN transceiver family, the TJA1021T/20/C,118 is a pin-compatible variant with a different slope control setting for EMI optimization. Both share the same SOIC-8 footprint and supply range.