NXP RT1010 series, MIMXRT1011CAE4A, 32-bit ARM Cortex-M7 single-core at 400MHz, 128K x 8 RAM, 44 I/O, 15x12-bit ADC, 3V-3.6V supply, -40°C to 105°C TJ, external program memory, tray, 80-FQFP (12x12mm).
- 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
- Date & lot codes on quoteStated per line before you commit; label photos on request.
- MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
- PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
Specifications
| Parameter | Value |
|---|---|
| Series | RT1010 |
| Mounting type | Surface Mount |
| Oscillator type | External, Internal |
| Program memory type | External Program Memory |
| Voltage - supply (Vcc (Vdd)) | 3V ~ 3.6V |
| Operating temperature | -40°C ~ 105°C (TJ) |
| Speed | 400MHz |
| Package | Tray |
| RAM size | 128K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Connectivity | EBI/EMI, I2C, SAI, SPDIF, SPI, UART/USART, USB2.0 OTG |
| Number of i (O) | 44 |
| Core processor | ARM® Cortex®-M7 |
| Case | 80-LQFP |
| Data converters | A/D 15x12b |
Frequently asked questions
Does the external program memory requirement force a specific flash chip or boot configuration?
The MIMXRT1011CAE4A has no internal Flash — program memory is mandatory over the FlexSPI interface. A SPI NOR flash partner must be specified on the BOM and its boot configuration (quad mode, dummy cycles, SFDP) validated before production release, particularly at qty 100+ where a flash substitution without re-qualification is a BOM risk.
Is this a drop-in replacement for our existing RT1010 board with 80-LQFP?
No. The 80-FQFP (12x12mm) package geometry differs from the standard 80-LQFP footprint — the pin count matches but the pad pattern and lead style do not. A board layout designed for 80-LQFP will not accept the FQFP variant without layout re-spin.