Skip to main content
NXP USA Inc. LPC832M101FDH20FP — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC832M101FDH20FP — ARM Cortex-M0+ 30MHz MCU, 16KB Flash, TSSOP-20

MPNLPC832M101FDH20FP
Active

NXP LPC832M101FDH20FP, LPC83x series, ARM Cortex-M0+ 30MHz 32-bit MCU with 16KB Flash, 4KB RAM, 16 GPIO, 5×12-bit ADC, I²C/SPI/UART, 1.8–3.6V supply, -40°C to 85°C operating temperature, 20-TSSOP package, tube.

$2.7200Ref. price · indicative, final on quote
Packaging20-TSSOP (0.173", 4.40mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

LPC832M101FDH20FP Technical Specifications
ParameterValue
SeriesLPC83x
Mounting typeSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~85°C(TA)
Speed30MHz
PackageTube
RAM size4K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, DMA, POR, PWM, WDT
ConnectivityI²C, SPI, UART/USART
Number of i (O)16
Core processorARM® Cortex®-M0+
Case20-TSSOP (0.173\", 4.40mm Width)
Data convertersA/D 5x12b
Program memory size16KB (16K x 8)

Frequently asked questions

Does the internal oscillator support Modbus-RTU baud accuracy at 115200 baud without an external crystal?

The oscillator type is Internal, meaning the part is designed for crystal-less operation. The ±1.5% accuracy requirement for standard Modbus-RTU at 115200 baud is a datasheet-specified parameter not listed in this ledger — verify against the NXP LPC832 datasheet before designing out the crystal.

How many of the 16 GPIO are available after allocating pins for I²C, SPI, and UART?

Five 12-bit ADC channels share pins with the 16 GPIO. After routing I²C/SPI and UART on dedicated pins, two to four ADC-capable pins typically remain free for analog sensor inputs — tight for designs needing simultaneous PWM outputs and analog sensing on the same pin-mux budget.