Skip to main content
NXP Semiconductors ACT108-600E,412 — Memory (DRAM / SRAM / Flash / EEPROM)
NXP Semiconductors

ACT108-600E,412 Triac, 600V 0.8A Sensitive Gate, TO-92-3

MPNACT108-600E,412
End of Life

WeEn ACT108-600E,412, Logic - Sensitive Gate Triac, Single, 600 V Off-State, 800 mA RMS, TO-226-3 / TO-92-3 (TO-226AA) Formed Leads Through Hole.

$0.18Ref. price · indicative, final on quote
ACT108-600E,412 datasheet
PackagingTO-226-3, TO-92-3 (TO-226AA) Formed Leads
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

ACT108-600E,412 Technical Specifications
ParameterValue
Triac typeLogic - Sensitive Gate
Mounting typeThrough Hole
Voltage - off state600 V
Voltage - gate trigger (Vgt)1 V
Current - hold (Ih)25 mA
Current - gate trigger (Igt)10 mA
Current - on state (It (RMS))800 mA
Current - non rep. surge 50, 60Hz8A, 8.8A
Operating temperature125°C (TJ)
PackageBulk
ConfigurationSingle
CaseTO-226-3, TO-92-3 (TO-226AA) Formed Leads

Product details

Package and rework reality

TO-92-3 with formed leads. Through-hole, so it survives a hot-air station without drama — the leads are clearly spaced, pin 1 is the gate (standard TO-92 pinout). If you need to pull it for a prototype swap, the leads bend back cleanly once. Bulk packaging means you get loose parts, not a reel; fine for bench work or low-volume assembly, but if your pick-and-place expects tape, this isn't it.

Lifecycle and supply position

The ACT108-600E,412 carries an Active lifecycle status — no last-time-buy clock ticking, no obsolescence risk on the horizon. It's a current-production part from WeEn, so you can qualify it into a new BOM without worrying about a sudden EOL notice. Sourced and quoted to order through independent distribution; availability and current pricing confirmed at quote time.

Frequently asked questions

What is the gate trigger current of ACT108-600E,412?

The maximum gate trigger current (Igt) is 10 mA, making it a sensitive-gate triac suitable for direct drive from logic-level signals or optocouplers like the MOC3063.

What is the maximum RMS current of ACT108-600E,412?

The maximum on-state RMS current (It(RMS)) is 800 mA, which defines the continuous load the triac can handle.

What is the surge current rating of ACT108-600E?

The non-repetitive surge current (Itsm) is rated at 8 A for 50 Hz and 8.8 A for 60 Hz, covering typical inrush from incandescent lamps or small transformers.

Is ACT108-600E compatible with MOC3063 optocoupler?

Yes, the 10 mA gate trigger current and 1 V gate trigger voltage are within the drive capability of a standard MOC3063 zero-cross optocoupler, so no additional buffer transistor is needed.