What this 74HC367PW,112 does on the bus
The Nexperia 74HC367PW,112 is a dual-element non-inverting buffer with 3-state outputs, built on the 74HC high-speed CMOS logic family. The 3-state outputs let you disconnect the buffer from a shared data bus when the output enable is deasserted, which is the standard approach for multiplexed address/data lines or bidirectional bus architectures.
Supply voltage and temperature — where it runs
Rated from 2V to 6V, this part covers the two most common digital rails. The 7.8mA output current at both high and low states is typical for 74HC driving a few CMOS loads or a short PCB trace; if you need to drive a heavier bus (like a backplane), budget a buffer with higher drive or add a line driver stage.
Package and footprint
Housed in a 16-TSSOP package (4.40mm body width), this is a surface-mount device intended for automated assembly. The 0.65mm pin pitch is standard for TSSOP-16, so existing footprints for that package work without a layout change.