NXP LPC11C24FBD48/301, ARM Cortex-M0 MCU 50MHz, 32KB Flash, CANbus
NXP LPC11C24FBD48/301, ARM Cortex-M0 50MHz, 32KB Flash, 8KB RAM, CANbus/I2C/SPI/SSP/UART, 36 I/O, 1.8-3.6V single supply, 48-LQFP (7x7mm), tray, -40°C to 85°C.
- 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
- Date & lot codes on quoteStated per line before you commit; label photos on request.
- MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
- PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
Specifications
| Parameter | Value |
|---|---|
| Series | LPC11Cxx |
| Mounting type | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~85°C(TA) |
| Speed | 50MHz |
| Package | Tray |
| RAM size | 8K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Connectivity | CANbus, I²C, Microwire, SPI, SSI, SSP, UART/USART |
| Number of i (O) | 36 |
| Core processor | ARM® Cortex®-M0 |
| Case | 48-LQFP |
| Data converters | A/D 8x10b |
| Program memory size | 32KB (32K x 8) |
Frequently asked questions
Can I load my LPC1114 binary directly onto this part?
No. The LPC11C24 uses a CAN-based bootstrap loader with a different memory map and entry point than the LPC1114's serial loader. Firmware must be recompiled with a linker script targeting the LPC11C24 device.
Is this part automotive-qualified (AEC-Q100)?
No. The -40°C to 85°C operating temperature grade listed here is an industrial/commercial specification. This exact FBD48/301 date code does not carry AEC-Q100 qualification. If automotive qualification is required, check with NXP for an automotive mask set variant or a Grade-qualified part in the series.
What is the minimum order quantity and does the tray packaging come split?
Tray minimum order quantity is per distributor policy and order size. Confirm split-pack availability and any moisture-sensitivity handling requirements (dry-bag/desiccant) for IPC-A-610 incoming inspection with your distributor before placing a panel-build order.