The IPA80R460CEXKSA1 is an 800 V, 5 A N-Channel MOSFET in the CoolMOS CE series.
Package and mounting — the full-pack advantage
The TO-220 Full Pack (PG-TO220-FP) is a fully isolated through-hole package. The mounting hole pattern matches standard TO-220 hardware. For the rework bench, the full-pack body runs hotter than a standard TO-220 for the same die — the 34 W dissipation limit reflects the higher thermal resistance of the plastic-isolated package. Plan the heatsink accordingly.
Gate threshold voltage is 3.9 V max at 680 µA. Recommended drive voltage is 10 V. Gate charge is 64 nC at 10 V. Input capacitance is 1600 pF at 100 V.
The 150°C maximum junction is typical for CoolMOS devices and allows operation in high-ambient enclosures as long as the heatsink keeps the junction below that limit. The 5 A continuous drain current is specified at 25°C case temperature; derate linearly above that — at 100°C case the current capability drops roughly to 3.5 A, so check the thermal derating curve in the datasheet.
For BOM planning, the active status removes the urgency of a last-time-buy, but as with any CoolMOS CE part, keep an eye on Infineon's PCN notices for die shrinks or package changes that could affect thermal performance.