Rated at 600 V drain-to-source with a continuous drain current of 10.6 A at 25°C case temperature, it targets offline switched-mode power supplies, power-factor correction stages, and flyback converters where the TO-220 Full Pack package provides full isolation from the heatsink — no insulating pad needed.
For a new BOM line or a redesign, the natural move is to evaluate a current CoolMOS generation replacement. The IPA60R380P6 (same 600 V / 380 mOhm class, PG-TO220-3-1 package) is a common cross-shop candidate — confirm pin compatibility and thermal pad layout before swapping.
At 150°C junction, Rds(on) roughly doubles from the 25°C typical — budget around 760 mOhm for thermal margin. The gate charge of 32 nC at 10 V keeps the switching losses manageable for hard-switched topologies in the 50–100 kHz range; the 700 pF input capacitance at 100 V drain-source aligns with that drive profile.
Through-hole mounting and thermal path
Maximum power dissipation is 31 W at case temperature — that limit governs the heatsink sizing, not the 10.6 A current rating alone.