Skip to main content
Infineon Technologies IPA50R280CE — Discrete Semiconductors

Infineon IPA50R280CE CoolMOS N-Ch MOSFET, 500 V, 280 mOhm

MPNIPA50R280CE
Obsolete

Infineon CoolMOS™ IPA50R280CE, N-Channel MOSFET, 500 V Vdss, 280 mOhm Rds(on) at 4.2 A, 13 A Id, TO-220-3 Full Pack, through hole, -55°C to 150°C.

$1.5100Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IPA50R280CE specifications
ParameterValue
SeriesCoolMOS™
FET typeN-Channel
MountingThrough Hole
Drain to source voltage500 V
Drive voltage (Max rds on, min rds on)13V
Current - continuous drain (Id) @ 25°C13A (Tc)
Power dissipation30.4W (Tc)
Operating temperature-55°C ~ 150°C (TJ)
PackageTube
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-220-3 Full Pack
Vgs(th) (Max) @ id3.5V @ 350µA
Rds on (Max) @ id, vgs280mOhm @ 4.2A, 13V
Gate charge (Qg) (Max) @ vgs32.6 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds773 pF @ 100 V

Product details

The Infineon IPA50R280CE is a 500 V N-channel CoolMOS MOSFET in a TO-220-3 Full Pack package. Rated for continuous drain current of 13 A at 25°C case temperature and a maximum on-resistance of 280 mOhm at 4.2 A with 13 V gate drive, it targets medium-power offline SMPS designs in the 100–300 W range.

Infineon lists the IPA50R280CE as Obsolete. That means no further production runs, no last-time-buy window — the part is out of the factory channel.

500 V drain-source voltage (Vdss) sets the off-state blocking capability — enough for universal-input PFC stages (bulk voltage around 400 V) with healthy derating margin. The 280 mOhm Rds(on) at 4.2 A and 13 V gate drive determines conduction loss: at 4.2 A drain current, expect about 4.9 W dissipation from Rds(on) alone, which fits within the 30.4 W package limit at case temperature. Gate charge of 32.6 nC at 10 V is modest — a standard 1 A gate driver can switch it in the 50–100 kHz range without excessive drive loss. Input capacitance of 773 pF at 100 V Vds keeps the Miller plateau manageable for simple bootstrap or half-bridge topologies.

Frequently asked questions

Is IPA50R280CE obsolete?

Yes, Infineon has marked the IPA50R280CE as Obsolete. No new production is planned. For a new design, select an active CoolMOS 500 V part in the same TO-220 Full Pack package with similar on-resistance.

What is the Vgs threshold of IPA50R280CE?

The maximum gate threshold voltage is 3.5 V at a drain current of 350 µA. Typical threshold is lower; the 3.5 V ceiling ensures the device is fully off below that gate voltage across temperature.