Specs side by side
2 parts compared · 18 differing specs across 18 total parameters.
| Parameter | ||
|---|---|---|
| Operating temperature | -40°C ~ 150°C (TJ) | - |
| High Side Voltage - Max (bootstrap) | 500 V | - |
| Logic Voltage - Vil, Vih | 6V, 9.5V | - |
| Supply voltage | 3.3V ~ 20V | - |
| Case | 14-DIP (0.300\", 7.62mm) | DIP-14 / SOIC-16 |
| Package | Tube | - |
| Channel Type | Independent | - |
| Component Category | - | High-Side / Low-Side Gate Drivers |
| Current - Peak Output (source, Sink) | 2A, 2A | - |
| Driven Configuration | Half-Bridge | - |
| Gate Type | IGBT, N-Channel MOSFET | - |
| Input Type | Non-Inverting | - |
| Market Reality | - | The IR2110 is the gate driver that half the worlds inverters, welders, motor drives and induction cookers were built around - a 14-pin part with an independent high and low channel, a floating bootstrap supply for the high side, and enough drive for the workhorse IGBTs and MOSFETs of two decades. The family splits by the one number that matters at the rail: IR2110 carries a 500V offset, IR2113 a 600V offset, and everything else - pins, drive current, logic - is shared. The buying story has a modern chapter too: Infineons IRS2110/IRS2113 are pin-to-pin successors with a tighter internal clamp, and a row of third-party equivalents (the FAN7392, the TF2110 class) keeps the socket servable from multiple lines. |
| Mounting | Through Hole | - |
| Number Of Drivers | 2 | - |
| Rise (fall Time) | 25ns, 17ns | - |
| Role In Circuit | - | Original Reference Part |
| Sourcing Status | - | Active Shenzhen Spot Sourcing (24–48h) |