Skip to main content
Analog Devices TSC428CPA-2
Analog Devices

TSC428CPA-2 Dual Power MOSFET Driver, Active, DIP-8

MPNTSC428CPA-2
End of Life

TelCom Semiconductor TSC428CPA-2, dual power MOSFET driver, DIP-8 package, Bulk shipping, Active lifecycle, RoHS non-compliant.

$1.07Ref. price · indicative, final on quote
TSC428CPA-2 datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TSC428CPA-2 Technical Specifications
ParameterValue
Series*
PackageBulk

Product details

Dual MOSFET driver — still in active production

The TSC428CPA-2 is a dual power MOSFET driver from TelCom Semiconductor, designed to drive the gate capacitance of two independent N-channel or P-channel power MOSFETs. It is a straightforward, non-inverting driver suited for switch-mode power supplies, motor controllers, and class-D audio amplifiers where a clean, high-current gate drive signal is needed.

RoHS non-compliance — a BOM-level decision

The TSC428CPA-2 is listed as RoHS non-compliant. This is a hard requirement for any design targeting EU RoHS exemption-free markets. If your BOM mandates full RoHS compliance, this part will not pass an audit. For legacy designs, military/aerospace programs with leaded solder exemptions, or prototype runs where compliance is not enforced, the non-compliant status is irrelevant.

For high-volume pick-and-place, Bulk requires manual tube feeding or a tube feeder; it is not a reel-ready format.

Frequently asked questions

What is a replacement for the TSC428CPA-2?

For a drop-in alternative, you would need to cross-reference the pinout and drive capability against other dual non-inverting MOSFET drivers in an 8-pin DIP package, such as the MIC4426 or TC4426 family, but these are not confirmed as direct substitutes without verifying the pinout and timing specs.

Is the TSC428CPA-2 RoHS compliant?

No, the TSC428CPA-2 is listed as RoHS non-compliant. This is a critical factor for any BOM that must meet EU RoHS requirements.