Skip to main content
Analog Devices REF01HSA-T — Discrete Semiconductors
Analog Devices

REF01HSA-T 10V Voltage Reference, ±0.5%, 25ppm/°C

MPNREF01HSA-T
End of Life

REF01 series, 10V Voltage Reference, Fixed Output, ±0.5%, 25ppm/°C, 21 mA output, 8-SOIC (0.154", 3.90mm Width), Surface Mount, 0°C ~ 70°C.

$3.37Ref. price · indicative, final on quote
REF01HSA-T datasheet
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

REF01HSA-T Technical Specifications
ParameterValue
SeriesREF01
Output typeFixed
Mounting typeSurface Mount
Reference typeSeries
Voltage - input13V ~ 33V
Voltage - output (Min (Fixed))10V
Current - output21 mA
Current - supply1.4mA
Operating temperature0°C ~ 70°C (TA)
PackageBulk
Tolerance±0.5%
Case8-SOIC (0.154\", 3.90mm Width)
Noise - 0.1Hz to 10Hz20µVp-p
Temperature coefficient25ppm/°C

Product details

10 V fixed reference — what it is and where it fits

The REF01HSA-T is a 10 V fixed-output series voltage reference from the REF01 family, in an 8-SOIC package. It delivers a stable 10 V rail from an input spanning 13 V to 33 V, making it a straightforward choice for powering the reference input of an ADC, DAC, or as the setpoint for a series regulator in industrial or bench equipment. The series architecture means the load current flows through the reference itself, so the 21 mA output current rating sets the maximum load it can drive directly — enough for a handful of op-amp inputs or a low-power ADC reference pin, but not for powering a heavy analog front end without buffering.

Package and rework — SOIC-8 is bench-friendly

The 8-SOIC package (3.90 mm body width) is one of the easiest surface-mount packages to rework.

Lifecycle and compliance — active but RoHS non-compliant

The part is marked Active on the lifecycle status. It is RoHS non-compliant.

Frequently asked questions

What is the temperature coefficient of REF01HSA-T?

The temperature coefficient is 25 ppm/°C, which adds about 17.5 mV of drift over the 0°C to 70°C operating range.

Can REF01HSA-T replace REF01H?

The REF01HSA-T and REF01H are both 10 V fixed references in the REF01 family, but the evidence does not list a direct cross-reference. Check the pinout and package compatibility against your board — both are 8-SOIC, but the suffix may indicate different tolerance or temperature grades. Confirm with the datasheet or an RFQ inquiry.

What is the difference between REF01HSA and REF01HSA-T?

The evidence does not detail the difference between REF01HSA and the -T suffix variant. The -T may indicate tape-and-reel packaging or a specific test condition. Verify with the manufacturer's documentation or an RFQ.