Through-hole DIP general-purpose op amp — the basics
The PM1012BIGP is a single-circuit general-purpose operational amplifier in an 8-pin DIP package (8-DIP / 8-PDIP). It operates from supply rails spanning 5 V minimum to 40 V maximum, making it a flexible building block for analog signal conditioning in through-hole designs. The through-hole mounting (8-DIP 0.300" body) suits prototyping, legacy board rework, and applications where socketed or hand-solderable components are preferred.
The 5 V to 40 V supply span covers common single-supply rails (5 V, 12 V, 24 V) and split supplies up to ±20 V. The 40 V maximum rail also provides margin for unregulated supplies in automotive or industrial environments where transients can push nominal 24 V rails above 36 V.
RoHS non-compliance — a procurement flag
The PM1012BIGP is listed as RoHS non-compliant. For EU, UK, or other RoHS-regulated markets, this part cannot be used in new consumer or commercial products without an exemption. However, it remains usable in military, aerospace, or legacy industrial equipment where RoHS exemptions apply or where leaded solder is still permitted. The procurement buyer should verify their jurisdiction's RoHS requirements before committing the BOM line.
The 8-DIP (0.300", 7.62mm) through-hole package is industry-standard for DIP-8 op amps. The supplier device package is 8-PDIP. The Bulk shipping medium means parts arrive loose in a bag or tube — no tape-and-reel, so pick-and-place is manual. For the rework lab tech: standard DIP soldering profile, 260°C peak recommended. No moisture sensitivity level is stated, but DIP packages are generally robust; baking is not needed unless the parts show obvious moisture exposure.