The OP260GS-REEL is a dual current-feedback operational amplifier from Analog Devices, delivering a 550 V/µs slew rate and 90 MHz -3 dB bandwidth. Current-feedback topology means the bandwidth stays nearly flat as you increase closed-loop gain — unlike a voltage-feedback amp where gain and bandwidth trade off directly. The dual-channel configuration saves board space and per-channel cost compared to using two single amplifiers. Each channel draws 9 mA supply current, so the total quiescent is 18 mA — reasonable for the speed class, but worth budgeting in the thermal design for the 16-SOIC package.
The OP260GS-REEL operates from a total supply span of 18 V to 36 V. In practice that means dual supplies from ±9 V up to ±18 V, or a single supply from 18 V to 36 V. The 18 V minimum rules out 5 V or 12 V single-supply systems — this is a part for industrial ±15 V rails, 24 V industrial buses, or similar higher-voltage analog stages. Not rated for extended automotive or downhole environments, but fine for factory automation, motor-drive signal conditioning, and base-station analog processing.
The 16-SOIC footprint is standard and widely supported in assembly.
Note the RoHS non-compliant flag — this part is not lead-free / RoHS-compliant, which may restrict its use in markets with strict RoHS enforcement (EU, California, etc.). If RoHS compliance is required, evaluate the AD8008ARMZ or other lead-free alternatives.