Active general-purpose op-amp in a hermetic can
The OP20CJ: Supply range spans 5 V to 30 V single or split supply.
Gain-bandwidth product is 100 kHz. Slew rate is 0.05 V/µs.
57 µA supply current — low-power analog stage
Supply current is 57 µA. Input offset is 150 µV.
TO-99-8 metal can — storage and handling notes
The TO-99-8 is a hermetic metal can with eight leads on a 0.230-inch diameter base. It is not moisture-sensitive (MSL 1), so no bake required before reflow or hand-soldering. The metal case can be grounded or left floating; if grounded, tie pin 4 (case) to the negative supply or analog ground. Through-hole mounting requires a 0.100-inch pitch hole pattern. Store the reels dry — the metal can is robust, but the leads are solder-dipped and can oxidize in humid storage.
Active lifecycle — no EOL watch needed
For BOM planning, no successor or replacement part is required at this time. Note that the OP20CJ is RoHS non-compliant, which may restrict its use in markets with RoHS enforcement. For lead-free builds, check the OP20 series lead-free variants or plan for an exemption.