JFET op-amp, single circuit, 28 MHz gain bandwidth, 50 V/µs slew rate, 44 V supply, 4.6 mA supply current, 8-CDIP (0.300", 7.62mm) through-hole, 8-CERDIP, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Amplifier type | J-FET |
| Voltage - input offset | 400 µV |
| Voltage - supply span | 44 V |
| Current - supply | 4.6mA |
| Current - input bias | 30 pA |
| Operating temperature | 0°C ~ 70°C |
| Gain bandwidth product | 28 MHz |
| Package | Bulk |
| Slew rate | 50V/µs |
| Case | 8-CDIP (0.300\", 7.62mm) |
| Number of circuits | 1 |
The OP17FZ: The 28 MHz gain-bandwidth and 50 V/µs slew rate separate this part from slower JFET siblings. For a unity-gain follower, small-signal bandwidth extends to 28 MHz.
The through-hole package mates to standard 8-pin DIP sockets or solders directly into plated through-holes. The ceramic body with hermetic seal gives moisture resistance beyond plastic DIP.
No — the OP17FZ is marked RoHS non-compliant, typical for CERDIP packages with tin-lead terminations. Verify your assembly's exemption status before ordering.