Skip to main content
Log in
Analog Devices OP06CZ/883C — Analog & Data Acquisition

OP06CZ/883C Instrumentation Amplifier, 100 V/µs Slew Rate

MPNOP06CZ/883C
End of Life

OP06CZ/883C, instrumentation amplifier, single circuit, 100 V/µs slew rate, 6 V to 44 V supply span, -55°C to 125°C, 8-CDIP (0.300", 7.62mm) / 8-CERDIP, through-hole, bulk.

$13.07Ref. price · indicative, final on quote
Analog Devices OP06CZ/883C datasheet (PDF)
Packaging8-CDIP (0.300", 7.62mm)
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

OP06CZ/883C specifications
ParameterValue
MountingThrough Hole
Amplifier typeInstrumentation
Voltage - supply span44 V
Operating temperature-55°C ~ 125°C
PackageBulk
Slew rate100V/µs
Case8-CDIP (0.300\", 7.62mm)
Number of circuits1

Product details

What the 100 V/µs slew rate buys you in a hi-rel signal chain

The OP06CZ/883C is a single-channel instrumentation amplifier packaged in a hermetic 8-CERDIP for through-hole mounting. Its 100 V/µs slew rate tracks high-speed transients in multiplexed data-acquisition front ends without slew-induced distortion.

Military temperature range and hermetic seal — where this part lives

The ceramic body also handles repeated thermal cycling better than epoxy-molded parts, which matters for systems that power-cycle across the full temperature swing.

Supply span: 6 V to 44 V — single or split rail

The supply span runs from 6 V minimum to 44 V maximum.

Frequently asked questions

Can OP06CZ/883C replace OP07?

The OP06CZ/883C is an instrumentation amplifier, while the OP07 is a precision operational amplifier. They are not direct pin-for-pin replacements; the OP06 integrates the input buffer and difference stage for common-mode rejection, which the OP07 lacks. If your design calls for an instrumentation amp, the OP06CZ/883C is the correct class; if you need a general-purpose op-amp, the OP07 is a different device family.