Skip to main content
Log in
Analog Devices MXL1013CN8+ — Analog & Data Acquisition

MXL1013CN8+ General Purpose Op-Amp, 0.4V/µs Slew Rate, 8-DIP

MPNMXL1013CN8+
End of Life

Maxim Integrated MXL1013CN8+, dual general-purpose op-amp, 8-DIP through-hole package, 0.4V/µs slew rate, 350µA supply per channel, 4V to 36V supply range, 0°C to 70°C operating temperature.

$2.75Ref. price · indicative, final on quote
Analog Devices MXL1013CN8+ datasheet (PDF)
Packaging8-DIP (0.300", 7.62mm)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MXL1013CN8+ specifications
ParameterValue
MountingThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset60 µV
Voltage - supply span36 V
Current - supply350µA (x2 Channels)
Current - input bias15 nA
Operating temperature0°C ~ 70°C
PackageBulk
Slew rate0.4V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

The MXL1013CN8+ is a dual general-purpose operational amplifier from Maxim Integrated in an 8-DIP through-hole package. It delivers a 0.4V/µs slew rate and draws 350µA per channel, making it a fit for low-speed signal conditioning, active filters, and sensor buffering in commercial-temperature equipment. The 4V to 36V supply span gives flexibility for single- or split-rail designs without a dedicated regulator.

No end-of-life notice is on record. The part ships in bulk (loose tubes), not tape-and-reel.

Frequently asked questions

Is MXL1013CN8+ equivalent to LM358?

The MXL1013CN8+ and LM358 are both dual general-purpose op-amps in 8-DIP, but they are not drop-in equivalents. The MXL1013CN8+ has a 0.4V/µs slew rate versus the LM358's typical 0.3V/µs, and its 60 µV input offset voltage is tighter than the LM358's typical 2 mV. Supply current is similar. Check your circuit's offset and slew-rate requirements before substituting.