Analog Devices MAX9917EUB+, dual general-purpose op-amp, 1 MHz gain bandwidth, 0.5 V/µs slew rate, rail-to-rail output, 40 µA supply per channel, 1.8 V to 5.5 V supply, -40°C to 85°C, 10-uMAX/uSOP package.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 200 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 40µA (x2 Channels) |
| Current - input bias | 1 pA |
| Current - output (Channel) | 15 mA |
| Operating temperature | -40°C ~ 85°C |
| Gain bandwidth product | 1 MHz |
| Package | Tube |
| Slew rate | 0.5V/µs |
| Case | 10-TFSOP, 10-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The rail-to-rail output stage lets it swing within millivolts of either supply rail, which matters when you are running from a single 1.8 V rail and need every bit of ADC input range.
Rail-to-rail output lets the amplifier swing within millivolts of the supply rails. Output can source or sink 15 mA per channel.
The supply current is 40 µA per channel, so 80 µA total for the dual amplifier.
The pinout follows the standard dual op-amp pinout for the 10-pin uMAX/uSOP package: pin 1 is output A, pin 2 is inverting input A, pin 3 is non-inverting input A, pin 4 is V+, pin 5 is non-inverting input B, pin 6 is inverting input B, pin 7 is output B, pin 8 is V-, pin 9 and 10 are not connected. The supplier device package is 10-uMAX/uSOP.