Maxim Integrated MAX97200AEWC+T, DirectDrive® Class H stereo headphone amplifier, 45mW x 2 into 16Ω, 1.62V–1.98V supply, 12-WLP package, -40°C to +85°C.
| Parameter | Value |
|---|---|
| Type | Class H |
| Series | DirectDrive® |
| Output type | Headphones, 2-Channel (Stereo) |
| Mounting | Surface Mount |
| Supply voltage | 1.62V ~ 1.98V |
| Max output power x channels @ load | 45mW x 2 @ 16Ohm |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Depop, Shutdown |
| Case | 12-WFBGA, WLBGA |
The part includes a depop circuit to suppress turn-on/turn-off clicks and a shutdown pin for power savings when the audio path is idle. Output is a 2-channel stereo headphone drive, and the 12-WLP package (12-bump wafer-level package) saves board area in space-constrained designs.
There is no end-of-life notice or last-time-buy schedule on record.
MAX97200AEWC+T is Active per the manufacturer's lifecycle status. There is no announced end-of-life or last-time-buy window.
45 mW per channel into a 16 Ω load, stereo. Power into higher impedances will be lower.
The MAX97200AEWC+T is a specific package and reel variant of the MAX97200A die. The suffix 'EWC+T' denotes the 12-WLP package and tape-and-reel packaging. Electrically it is the same Class H amplifier; verify the footprint matches your board before substituting.
The listed type is Class H. Class H amplifiers use a dynamically adjusted supply rail to reduce power dissipation at low signal levels while preserving headroom for peaks.