Skip to main content
Log in
Analog Devices MAX825REUK+T — Power Management (PMIC / Gate Driver)

MAX825REUK+T Simple Reset/Power-On Reset, 2.63V Threshold

MPNMAX825REUK+T
End of Life

Analog Devices MAX825REUK+T, Simple Reset/Power-On Reset IC, 2.63V threshold, Active High/Active Low push-pull output, 140ms min reset timeout, -40°C to 125°C, SOT-23-5 package.

$5.11Ref. price · indicative, final on quote
Analog Devices MAX825REUK+T datasheet (PDF)
PackagingSC-74A, SOT-753
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX825REUK+T specifications
ParameterValue
TypeSimple Reset/Power-On Reset
MountingSurface Mount
Voltage - threshold2.63V
Number of voltages monitored1
Operating temperature-40°C ~ 125°C (TA)
ResetActive High/Active Low
OutputPush-Pull, Totem Pole
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout140ms Minimum
CaseSC-74A, SOT-753

Product details

Both active-high and active-low reset outputs are available from the same chip, so it can drive a microcontroller's active-low reset pin and an FPGA's active-high reset input simultaneously without an external inverter. The push-pull output stage eliminates the need for a pull-up resistor on either output.

Housed in a SOT-23-5 surface-mount package. Surface-mount only — no through-hole variant exists.

ROHS3 compliant and lead-free per the current material declaration. No PCN or LTB risk for ongoing production builds.

Frequently asked questions

What is the exact reset threshold voltage of MAX825REUK+T?

The reset threshold voltage is 2.63V. The supervisor asserts reset when the monitored voltage drops below this level and releases it after a 140ms minimum timeout once the rail recovers above threshold.

Does MAX825REUK+T provide both active high and active low reset outputs simultaneously?

Yes, the MAX825REUK+T provides both active-high and active-low reset outputs from the same device. Both are push-pull outputs, so no external pull-up resistors are needed.

Is MAX825REUK+T RoHS compliant?

Yes, it is ROHS3 compliant and lead-free per the current compliance declaration.

Can I use MAX825REUK+T as a replacement for MAX825REUK+ (non-T version)?

The T suffix indicates tape-and-reel packaging; the die and electrical specifications are identical. The non-T version typically ships in tubes or bulk. Functionally interchangeable — verify the packaging format your pick-and-place line expects.