Maxim Integrated MAX824LEXK-T, Simple Reset/Power-On Reset, Reset Active High/Active Low, Push-Pull Output, 140ms Minimum Reset Timeout, 4.63V Threshold, SC-70-5, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 4.63V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active High/Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | 5-TSSOP, SC-70-5, SOT-353 |
The output is push-pull, totem-pole style, so no external pull-up resistor is needed. It sits in a 5-pin SC-70-5 package (also fits SOT-353 footprints), surface-mount, and runs across the industrial temperature range of -40°C to 85°C.
It is RoHS non-compliant, so if your BOM requires lead-free assembly, this part will not pass inspection. No lead-free version of this exact code exists.
No, the MAX824LEXK-T is listed as RoHS non-compliant. It is not lead-free.
The MAX824 and MAX825 are pin-compatible and share the same package and threshold options, but the reset output polarity differs. The MAX824 provides both active-high and active-low outputs; the MAX825 typically offers a different output configuration (e.g., active-low only or open-drain). Verify the output type needed for your design before substituting.