Active production — five-rail voltage supervisor in a through-hole DIP
The MAX8215EPD: The open-drain or open-collector output asserts low when any monitored voltage falls below its threshold. The 20 µs typical propagation delay means the downstream logic sees the fault within one switching cycle of a typical 50 kHz supply — fast enough to trigger a system reset before data corruption in most processor-based designs.
14-PDIP through-hole — board-fit and temperature grade
Housed in a 14-lead PDIP (0.300" body width), the MAX8215EPD is a through-hole part suited for prototyping, legacy rework, or designs where a socketed supervisor is preferred over a surface-mount package. The part ships in bulk tube packaging — not tape-and-reel — so it is ready for hand-insertion or socketed boards without a feeder changeover.
RoHS non-compliant — compliance note for BOM review
The MAX8215EPD is marked RoHS non-compliant. For designs that require RoHS conformance, this part may need a waiver or an alternative.