Maxim Integrated MAX806TCSA Battery Backup Circuit, Active Low Reset, Push-Pull Output, 3.075V Threshold, 140ms Timeout, 8-SOIC, Surface Mount.
| Parameter | Value |
|---|---|
| Type | Battery Backup Circuit |
| Mounting | Surface Mount |
| Voltage - threshold | 3.075V |
| Number of voltages monitored | 1 |
| Operating temperature | 0°C ~ 70°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
The MAX806TCSA: The push-pull (totem-pole) output drives the reset line directly without needing an external pull-up resistor — it sinks or sources current to hold the line in the asserted state. This simplifies the board layout around the microcontroller or MPU reset pin.
The part is RoHS non-compliant per the manufacturer's declaration, so it is not suitable for assemblies requiring RoHS exemption-free status.
The manufacturer lists the MAX806TCSA as RoHS non-compliant. Compliance documentation is available from the supplier upon request.