Maxim Integrated MAX706CUA, Simple Reset/Power-On Reset, Active Low, Push-Pull Output, 140ms Minimum Reset Timeout, 4.4V Threshold, 8-TSSOP/MSOP, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 4.4V |
| Number of voltages monitored | 1 |
| Operating temperature | 0°C ~ 70°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
It is suited for indoor electronics, office equipment, appliances, and other environments where the ambient stays within that range. Not rated for industrial or automotive under-hood use.
It is RoHS non-compliant per the original release, so verify your assembly house's exemption acceptance if you are running lead-free reflow.
Yes, the reset output is active low. It goes low when the monitored voltage falls below the threshold and stays low for the reset timeout period after recovery.
The reset timeout is a minimum of 140ms. This is the duration the reset output stays active after the monitored voltage returns above the threshold.