Skip to main content
Analog Devices MAX699EWE — Discrete Semiconductors
Analog Devices

MAX699EWE Simple Reset/Power-On Reset IC, 4.65V Threshold

MPNMAX699EWE
End of Life

Maxim Integrated MAX699EWE, Simple Reset/Power-On Reset, Active High/Active Low, Open Drain, Push-Pull, 140ms Minimum Reset Timeout, 4.65V Threshold, 16-SOIC (0.295", 7.50mm Width), -40°C ~ 85°C.

$3.31Ref. price · indicative, final on quote
MAX699EWE datasheet
Packaging16-SOIC (0.295", 7.50mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX699EWE Technical Specifications
ParameterValue
TypeSimple Reset/Power-On Reset
Mounting typeSurface Mount
Voltage - threshold4.65V
Number of voltages monitored1
Operating temperature-40°C ~ 85°C (TA)
ResetActive High/Active Low
OutputOpen Drain, Push-Pull
PackageBulk
Reset timeout140ms Minimum
Case16-SOIC (0.295\", 7.50mm Width)

Product details

RoHS non-compliance — plan accordingly

This part is marked RoHS non-compliant. That means it contains lead (Pb) in the solder finish or in the die attach, and cannot be used in products destined for EU RoHS-regulated markets unless a specific exemption applies. For military, aerospace, or other high-reliability builds that still use leaded solder, this is not a problem — in fact, it's preferred. For commercial or consumer gear bound for Europe, you'll need an RoHS-compliant alternate. The MAX699EWE is still listed as Active in production, so there is no imminent last-time-buy pressure.

Sourcing and availability

The MAX699EWE is an active Maxim Integrated part, but it's RoHS non-compliant, so mainstream distributors may not stock it in volume. We source it through independent distribution and can quote it to order against an RFQ.

Frequently asked questions

What is the reset timeout of MAX699EWE?

The reset timeout is a minimum of 140ms. That's the time the reset output stays asserted after the monitored voltage rises above the 4.65V threshold. It's a standard value that covers most processor power-up sequences.

What is the difference between MAX699EWE and MAX700EWE?

The MAX700EWE is a close sibling in the same family. The key difference is the voltage threshold: the MAX699EWE monitors at 4.65V, while the MAX700EWE monitors at 4.40V. Both come in the same 16-SOIC package and have the same 140ms reset timeout. If your rail is 5V ±5%, the 4.65V threshold gives tighter supervision; if you need a lower trip point, the MAX700EWE is the one.

What is MAX699EWE's listed type and reset output?

The device type is Simple Reset/Power-On Reset. The reset output is available as both Active High and Active Low, and can be configured as Open Drain or Push-Pull. That gives flexibility to interface with different processor reset input requirements.