Analog Devices MAX6866UK20D3S+T Simple Reset/Power-On Reset IC, active-low push-pull output, 2V threshold, 150ms minimum reset timeout, SOT-23-5 package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 2V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Strip |
| Reset timeout | 150ms Minimum |
| Case | SC-74A, SOT-753 |
The MAX6866UK20D3S+T: Housed in a SOT-23-5 package (SC-74A, SOT-753 equivalent), the part is hand-solderable with a fine-tip iron or hot-air station — no reflow oven required for prototyping. The 5-pin footprint fits a standard SOIC-8 adapter board for breadboard use, and the 150ms reset timeout gives a clean power-up sequence for most MCUs without needing an external RC delay.
It has an active-low, push-pull (totem-pole) output with a minimum reset timeout of 150ms. The push-pull output drives high or low without an external pull-up resistor.
Yes — the SOT-23-5 package (SC-74A) is hand-solderable with a fine-tip iron or hot air. The 5-pin footprint also fits standard SOIC-8 adapter boards for breadboard prototyping.