Single-channel supervisor with 4.6V threshold
The MAX6806XR26-T: The push-pull, totem-pole output drives the reset line directly without an external pull-up resistor, simplifying the connection to a processor's reset input.
30µs reset timeout ensures stable processor boot
A 30µs typical reset timeout holds the processor in reset after the supply crosses the 4.6V threshold, giving the oscillator and internal rails time to settle before the CPU starts executing code. This 30µs window is short enough that the system does not delay power-up noticeably, yet long enough to prevent a premature release into an unstable supply state common during cold starts.
Package and temperature grade for industrial use
Housed in an 8-µMAX package (3mm x 3mm body, 0.118-inch width), the part fits on tight mixed-signal boards where supervisor ICs sit near the processor or ASIC being monitored.
Note that this part is marked RoHS non-compliant, so it is not suitable for assemblies requiring RoHS exemption-free compliance — confirm your BOM's environmental requirements before specifying.