Push-pull output — no pull-up resistor needed
The MAX6806UA23 uses a push-pull (totem pole) output stage. The output actively drives high or low — no open-drain, no external pull-up resistor required.
MAX6806UA23 Simple Reset/Power-On Reset, 4.6V Threshold
MPNMAX6806UA23
End of Life
Maxim Integrated MAX6806UA23, Simple Reset/Power-On Reset, Active Low, Push-Pull/Totem Pole Output, 4.6V Threshold, 30µs Typical Reset Timeout, 8-µMAX, -40°C to 85°C.
$2.74Ref. price · indicative, final on quote
Packaging8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 4.6V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Bulk |
| Reset timeout | 30µs Typical |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
Product details
Frequently asked questions
Does MAX6806UA23 have an open-drain output?
No. The output is push-pull (totem pole), active low. It drives high and low without needing an external pull-up resistor, but cannot be wire-ORed with other open-drain outputs.
Can MAX6806UA23 monitor multiple voltages?
No, it monitors a single voltage. The part has one voltage-monitored channel.