Analog Devices MAX6800UR31D3+T, Simple Reset/Power-On Reset IC, Active High, Push-Pull Output, 3.08V Threshold, 100ms Minimum Reset Timeout, -40°C to 125°C, SOT-23-3 Package.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 3.08V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 125°C (TA) |
| Reset | Active High |
| Output | Push-Pull, Totem Pole |
| Package | Strip |
| Reset timeout | 100ms Minimum |
| Case | TO-236-3, SC-59, SOT-23-3 |
This part uses an active-high reset output with a push-pull, totem-pole stage.
Housed in a SOT-23-3 package (also known as TO-236-3 or SC-59), surface mount only. The three pins are ground, supply, and reset output — no manual reset input, no watchdog. Board area is minimal; fits the same footprint as countless other reset ICs in this package.
It is active high reset. The push-pull output drives the reset line high during a fault condition. This is the opposite of the more common active-low reset ICs.
The reset timeout is 100ms minimum. After the supply recovers above the threshold, the reset output stays asserted for at least 100ms to let the system stabilize.