Maxim Integrated MAX6717UKZWD3 Multi-Voltage Supervisor, Active Low, Open Drain, 140ms Minimum Reset Timeout, 1.665V/2.313V Thresholds, SOT-23-5, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Multi-Voltage Supervisor |
| Mounting | Surface Mount |
| Voltage - threshold | 1.665V, 2.313V |
| Number of voltages monitored | 2 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Open Drain or Open Collector |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | SC-74A, SOT-753 |
The reset output is active-low, open-drain, so it can be wire-ORed with other reset sources or pulled up to a different voltage than the monitored rails. The 140ms minimum reset timeout holds the system in reset long enough for the power supplies and oscillator to stabilise after a brownout or power-up.
Note that this variant is RoHS non-compliant. If your assembly requires RoHS compliance, verify the lead-free alternative before committing the BOM.
It is a dual-voltage supervisor that monitors two supply rails — typically a 1.8V core and a 2.5V I/O — and holds the system in reset for at least 140ms if either rail drops below its threshold. Common in embedded systems, industrial controllers, and telecom equipment that need reliable power-on reset and brownout protection.
Maxim offers several pin-compatible supervisors in the same SOT-23-5 footprint with different threshold voltage pairs. The MAX6717 family includes variants for other common rail combinations (e.g., 3.3V/1.8V, 5.0V/3.3V). Check the family datasheet for the exact threshold set your rails require.
No, this specific variant is listed as RoHS non-compliant. If RoHS compliance is required, look for a lead-free suffix variant within the MAX6717 family.