Skip to main content
Log in
Analog Devices MAX6713SEXS-T — Power Management (PMIC / Gate Driver)

MAX6713SEXS-T Simple Reset/Power-On Reset, 2.93V Threshold

MPNMAX6713SEXS-T
End of Life

Maxim Integrated MAX6713SEXS-T Simple Reset/Power-On Reset IC, active-low open-drain output, 2.93V threshold, 140ms timeout, SC-70-4 package, -40°C to +125°C.

$2.74Ref. price · indicative, final on quote
Analog Devices MAX6713SEXS-T datasheet (PDF)
PackagingSC-82A, SOT-343
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX6713SEXS-T specifications
ParameterValue
TypeSimple Reset/Power-On Reset
MountingSurface Mount
Voltage - threshold2.93V
Number of voltages monitored1
Operating temperature-40°C ~ 125°C (TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageBulk
Reset timeout140ms Minimum
CaseSC-82A, SOT-343

Product details

Reset supervisor for a 2.93V rail — SC-70-4 footprint

The MAX6713SEXS-T: Housed in the SC-70-4 package (also designated SC-82A, SOT-343), this surface-mount supervisor fits into space-constrained designs where a small footprint and a single monitored voltage are sufficient.

Temperature range and reset timing

The 140ms minimum reset timeout gives the downstream processor or FPGA enough time to stabilize its internal state after the supply rail comes up, preventing premature release of the reset line before the system is ready.

Active production and sourcing

Note that the MAX6713SEXS-T is marked as RoHS non-compliant per the manufacturer's listing. If your BOM requires RoHS compliance, the suffix variant MAX6713SEXS+T (lead-free) is the direct alternative to evaluate.

Frequently asked questions

What is the exact reset threshold voltage of MAX6713SEXS-T?

The reset threshold is 2.93V. This means the device asserts a reset when the monitored supply rail drops below 2.93V and releases it after a 140ms timeout once the rail recovers above that level.

Is MAX6713SEXS-T RoHS compliant?

For a lead-free version, use the MAX6713SEXS+T suffix variant.

Can MAX6713SEXS-T be used to monitor a 3.3V rail?

The 2.93V threshold is designed to monitor a 3.3V supply rail. When the 3.3V rail drops below 2.93V, the supervisor asserts a reset, providing undervoltage protection for the downstream logic.